 |
 |
 |
| PetLifeEliteR Anions- PolymerTM |
| Barcode : |
Weight : | Volume : | Treat up to : | Packaging : |
| 009989070240 | 3.5 oz / 100g |
4.3 oz / 125ml |
125 gallons / 500 liters | PET Can |
| 009989070257 | 7 oz / 200g |
8.5 oz / 250ml |
250 gallons / 1,000 liters | PET Can |
| 009989070264 | 14 oz / 400g |
17 oz / 500ml |
500 gallons / 2,000 liters | PET Can |
| 009989070271 | 28 oz / 800g |
34 oz / 1,000ml |
1,000 gallons / 4,000 liters | PVC Zip Bag |
| Benefit : |
| PetLifeEliteR Anions- PolymerTM is a unique synthetic polymer that removes soluble and insoluble organic impurities from water. It is the highest capacity organic filtration polymer on the market. PetLifeEliteR Anions- PolymerTM controls ammonia, nitrites and nitrates by removing ions- from nitrogenous organic waste that would otherwise be converted into these harmful chemicals. PetLifeEliteR Anions- PolymerTM will not reduce the levels of ions+ such as calcium , magnesium or trace elements. PetLifeEliteR Anions- PolymerTM progressively darkens as it removes impurities, and is easily renewed by treating with concentrated salt per recommended regeneration instructions. PetLifeEliteR Anions- PolymerTM does not affect the hardness of water. For freshwater plant, we recommend using with PetLifeEliteR Cations+ PolymerTM to make soft water. Freshwater & Saltwater suitable. |
| Directions : | |
| Rinse before use. Canister filtration : Put them in PetLifeEliteR MediaBagTM (inside) and place it in last chamber. Passive filtration : Put them in PetLifeEliteR MediaBagTM (inside) and place in an area of pump. Fluidised reactor filtration : Load them into fluidised reactor as directed, adjust maximum flow rate by the them floating at 3/4 of chamber. Exhaustion is indicated by a pronounced discoloration of the beads to dark brown. The first used can treat up to 6 months. After regeneration it will be decrease performance 10-20% we recommended add new more 10-20% Restart after regeneration 5-6 times. |
|
| To Calculate : | |
| Width (inc) x Length (inc) x Height (inc) x 0.015625 = Volume (liters) For example 20" x 48" x 20" x 0.015265 = 300 liters Width (cm) x Length (cm) x Height (cm) / 1000 = Volume (liters) For example 50 cm x 120 cm x 50 cm / 1000 = 300 liters |
| Basic Regeneration : |
| Once it is exhausted, it can be easily regenerated with a kitchen salt and water (do not use seawater). Soak in a 1:1 salt:water solution for 24 hours in a non-metallic container. |
| Expert Regeneration : |
| Add a solution of PetLifeEliteR ChlorinePTM 5 spoons and water 1 liter. Soak in a solution for 24 hours in a non-metallic container in a well-ventilated area, away from children. Rinse well, then soak for 24 hours with a solution containing 20 drops of PetLifeEliteR Clear+ifierTM. Rinse well again. For freshwater use, soak beads for 4 hours in a solution containing 4 capfuls of PetLifeEliteR pHUpTM per cup of water. The original color and full activity should now be restored and PetLifeEliteR Anions- PolymerTM is ready for reuse. Caution : some slime coat products may permanently foul PetLifeEliteR Anions- PolymerTM and render regeneration difficult. Do not reuse if odor of chlorine is detectable. If uncertain, soak beads in small quantity of water and test for residual chlorine with a chlorine test kit. |
| Ingredients : |
| Anion Polymer Food Grade 100% |
| Specification : |
| Diameter : 1-2mm Ion- Adsorption : 80% Moisture Content : 80% Ash Content : 5% PH : 7 Hardness : 50% C.T.C. : 80% Contact Time : 3-5 sec |
| Remark : |
| Keep out of reach of children. Safe for human consumption. For aquarium use only. |
| Recommend product boosting effective : | |
 |
  PetLifeEliteR ChlorinePTM |
 |
  PetLifeEliteR Clear+ifierTM |
 |
  PetLifeEliteR GAC GranularActivatedCarbonTM |
 |
  PetLifeEliteR GAZ GranularActivatedZeoliteTM |
 |
  PetLifeEliteR GFO GranularFerricOxideTM |
 |
  PetLifeEliteR MediaBagTM |
 |
  PetLifeEliteR NitroPelletsTM |
 |
  PetLifeEliteR pHUpTM |